Technical Study Notes & Explanations
Complete Fitter Trade Question Bank (English & Bengali)
1. Grease in bearing is fed through—
(বেয়ারিং-এ গ্রিজ কিসের মাধ্যমে দেওয়া হয়?)
Grease is a semi-solid lubricant. It cannot flow easily on its own like liquid oil, so it must be forced into the bearing under pressure using a force-feed system (such as a grease gun or plunger mechanism).
গ্রিজ হলো একটি অর্ধ-কঠিন (semi-solid) লুব্রিকেন্ট। এটি তরল তেলের মতো নিজে থেকে সহজে প্রবাহিত হতে পারে না, তাই চাপ প্রয়োগ করে ফোর্স ফিড (Force feed) পদ্ধতির মাধ্যমে এটিকে বেয়ারিংয়ের ভেতরে প্রবেশ করানো হয়।
2. At __________ lubricant starts flowing.
(কোন তাপমাত্রায় লুব্রিকেন্ট প্রবাহিত হতে শুরু করে?)
Pour Point: The lowest temperature at which a lubricant maintains its fluid transition state and begins or continues to flow.
Flash Point: The temperature at which volatile oil releases enough vapor to momentarily flash or ignite when exposed to an open flame (around 200°C).
পৌর পয়েন্ট (Pour point): এটি হলো সেই সর্বনিম্ন তাপমাত্রা যেটিতে একটি লুব্রিকেন্ট তার জমে থাকা বা কঠিন অবস্থা থেকে তরল অবস্থায় রূপান্তরিত হয়ে প্রবাহিত হতে শুরু করে।
ফ্ল্যাশ পয়েন্ট (Flash point): যে তাপমাত্রায় তেল থেকে পর্যাপ্ত বাষ্প তৈরি হয় এবং আগুনের সংস্পর্শে এলে তা সাময়িকভাবে জ্বলে ওঠে (যেমন চিত্রে ২০০°C নির্দেশ করা হয়েছে)।
3. Pipe vice can be used to hold pipes up to __________ diameter.
(পাইপ ভাইস সর্বোচ্চ কত ব্যাসের পাইপ ধরতে পারে?)
A standard Pipe Vice is used to firmly clamp and hold circular jobs. It is manufactured using Cast Steel. The angle of the inner V-groove clamping zone is typically 90°.
- Standard Pipe Vice Range: 3 mm to 63 mm
- Chain Pipe Vice Range: 63 mm to 200 mm
একটি সাধারণ পাইপ ভাইস (Pipe Vice) বৃত্তাকার বা গোলকাকার বস্তু (যেমন পাইপ) শক্তভাবে ধরে রাখার জন্য ব্যবহৃত হয়। এটি কাস্ট স্টিল (Cast Steel) দ্বারা তৈরি এবং এর ভেতরের খাঁজের কোণ সাধারণত ৯০° হয়।
- সাধারণ পাইপ ভাইসের ক্ষমতা: 3 mm থেকে 63 mm
- চেন পাইপ ভাইসের ক্ষমতা (Chain Pipe Vice): 63 mm থেকে 200 mm
4. Reamers are generally used for—
(রীমার সাধারণত কী কাজে ব্যবহৃত হয়?)
Reaming is a high-precision finishing process used to make the internal surface of a drilled hole smoother and size-accurate. It removes a very small amount of material (typically 0.02 mm to 0.15 mm). Made of H.C.S or H.S.S.
রীমিং (Reaming): এটি একটি ফিনিশিং অপারেশন যা ড্রিল করা হোলকে নিখুঁত ও অত্যন্ত চিকন বা মসৃণ (smoother) করতে ব্যবহৃত হয়। এটি খুব সামান্য মেটেরিয়াল কাটে (সাধারণত 0.02 mm থেকে 0.15 mm)। এটি H.C.S অথবা H.S.S দিয়ে তৈরি হয়।
5. Slip renewable bushings are used when—
(স্লিপ রিনিউয়েবল বুশ কখন ব্যবহার করা হয়?)
Slip Renewable Bush: Used for multiple operations (e.g., drilling followed immediately by reaming in the same location). Easily removable via a locking clamp setup.
Fixed Renewable Bush: Used for a single specific operation using one tool and secured with a retention screw.
স্লিপ রিনিউয়েবল বুশ (Slip Renewable): যখন একই হোলে একাধিক অপারেশন (যেমন প্রথমে ড্রিলিং, তারপর রীমিং) করতে হয় তখন এটি ব্যবহৃত হয়। এটি লকিং ক্ল্যাম্পের সাহায্যে খুব সহজে খোলা বা পরিবর্তন করা যায়।
6. Which of the following drill jig is used to drill radial holes on cylindrical or spherical workpieces?
(বেলনাকার বা বৃত্তাকার ওয়ার্কপিসে রেডিয়াল হোল তৈরি করতে কোন জিগ ব্যবহার করা হয়?)
Diameter Jig: Specifically designed to align and hold cylindrical or spherical parts. It features a built-in V-block base support to drill perfect radial holes through the center axis.
ডায়ামিটার জিগ (Diameter Jig): বেলনাকার (cylindrical) বা গোলাকার (spherical) বস্তুর ঠিক কেন্দ্র বরাবর ব্যাসার্ধ অনুযায়ী ছিদ্র (Radial Hole) করার জন্য এই জিগ ব্যবহার করা হয়। এতে বস্তুকে ধরে রাখার জন্য একটি V-block সাপোর্ট থাকে।
7. What is the advantage of a screwed fluted tap?
(স্ক্রুড ফ্লুটেড ট্যাপ ব্যবহারের সুবিধা কী?)
Spiral Flute Tap: Pulls the metal chips backward (upwards) out of the top of the hole, making it ideal for deep blind holes where chips cannot fall through. Excellent for soft/stringy metals like Aluminum.
স্পাইরাল ফ্লুট ট্যাপ (Spiral Flute): এটি চিপসকে পেছনের দিকে অর্থাৎ উপরের দিকে (backward/up) টেনে বের করে আনে। তাই এটি ব্লাইন্ড হোলের (Blind hole) জন্য সবচেয়ে উপযোগী, যা চিপস আটকে যাওয়া রোধ করে সহজে থ্রেড কাটতে সাহায্য করে।
8. What should be the Blank size of a round bar cutting M16 thread with 1 mm pitch with a die?
(ডাই দিয়ে ১ মিমি পিচযুক্ত M16 থ্রেড কাটার জন্য রাউন্ড বারের ব্ল্যাঙ্ক সাইজ কত হওয়া উচিত?)
Formula: Blank Size = d - (p / 10) or Nominal Diameter - (0.1 × Pitch)
Calculation: 16 - (0.1 × 1) = 16 - 0.1 = 15.9 mm.
সূত্র: ব্ল্যাঙ্ক সাইজ = নমিনাল ব্যাস - (০.১ × পিচ)
গণনা: 16 - (0.1 × 1) = 16 - 0.1 = 15.9 mm। এক্সটারনাল থ্রেড কাটার সময় মেটেরিয়ালের প্রসারণের জন্য ব্ল্যাঙ্ক সাইজ সামান্য ছোট রাখা হয়।
9. __________ is not required in lapping.
(ল্যাপিং-এ কোনটির প্রয়োজন হয় না?)
Lapping is a precision finishing process using fine abrasive powders (like Aluminium oxide) blended with a vehicle/paste. Copious flowing liquid coolant is not required for this slow operation.
ল্যাপিং (Lapping) একটি অত্যন্ত সূক্ষ্ম সারফেস ফিনিশিং প্রক্রিয়া। এতে অ্যাব্রেসিভ পাউডারের সাথে লুব্রিকেন্ট পেস্ট ব্যবহার করা হয়। এই ধীরগতির প্রক্রিয়ায় প্রচুর পরিমাণে প্রবাহিত তরল কুল্যান্ট (Coolant) এর কোনো প্রয়োজন হয় না।
10. Precision honing process is performed under controlled pressure and with:
(প্রিসিশন হোনিং প্রক্রিয়াটি নিয়ন্ত্রিত চাপ এবং কিসের সমন্বয়ে করা হয়?)
Honing: A surface finishing operation executed by an abrasive tool called a Hone. It performs a combined rotary and reciprocating motion while the workpiece remains stationary to correct errors like out-of-roundness or taper.
হোনিং (Honing): এটি একটি অভ্যন্তরীণ সারফেস ফিনিশিং কাটিং প্রক্রিয়া যা 'হোন' টুলের সাহায্যে করা হয়। এই টুলটি একই সাথে ঘূর্ণন গতি (Rotary) এবং ওঠানামা গতি (Reciprocating) এর সমন্বয়ে সিলিন্ডারের ভেতরের ত্রুটি দূর করে।
11. The factor affecting water demand is—
(পানির চাহিদাকে প্রভাবিত করার উপাদান কোনটি?)
Water consumption requirements depend on all environmental, population, and economic structures together.
কোনো এলাকার পানির চাহিদা ওই অঞ্চলের জলবায়ু, জনসংখ্যা বা সম্প্রদায়ের আকার এবং পানির মূল্য—এই সবকিছুর ওপরেই নির্ভর করে পরিবর্তিত হয়।
12. In pipe lines, Eccentric reducers are used mainly in:
(পাইপ লাইনে এক্সেন্ট্রিক রিডিউসার প্রধানত কোন পজিশনে ব্যবহৃত হয়?)
Eccentric Reducer: Has an offset centerline. It is strictly used in horizontal pipelines to maintain a flat bottom alignment, preventing air pockets or airlocks from forming.
এক্সেন্ট্রিক রিডিউসার (Eccentric Reducer): এর উভয় প্রান্তের কেন্দ্র আলাদা থাকে এবং এর নিচের দিকটি সোজা বা ফ্ল্যাট থাকে। এটি মূলত হরাইজন্টাল বা অনুভূমিক পাইপলাইনে ব্যবহার করা হয় যাতে পাইপের ভেতরে বায়ু বা এয়ারলক (airlock) তৈরি হতে না পারে।
13. The Combined operation of drilling and countersinking with one tool is known as:
(একটিমাত্র টুলের সাহায্যে ড্রিলিং এবং কাউন্টারসিঙ্কিংয়ের যৌথ অপারেশনকে কী বলে?)
A Center Drill is a specialized dual-purpose tool designed to simultaneously create a small pilot hole (drilling) and a chamfered conical opening (countersinking) to fit lathe centers.
সেন্টার ড্রিলিং (Center drilling): একটিমাত্র বিশেষ টুলের সাহায্যে যখন একই সাথে একটি ছোট গর্ত বা পাইলট হোল তৈরি (drilling) এবং তার মুখে একটি কোণাকার খাঁজ তৈরি (countersinking) করা হয়, তখন তাকে সেন্টার ড্রিলিং বলা হয়।
14. Name the accessory which is NOT used in a drilling machine?
(নিচের কোন অ্যাক্সেসরিটি ড্রিলিং মেশিনে ব্যবহৃত হয় না?)
Sleeves, Sockets, and Drill Chucks are standard accessories used to hold drills inside the spindle. Tool Holders are used on lathes or milling machines, not drilling spindles.
স্লীভ, সকেট এবং ড্রিল চক হলো ড্রিলিং মেশিনের স্পিন্ডলে ড্রিল বিট ধরে রাখার সাধারণ অ্যাক্সেসরিজ। কিন্তু টুল হোল্ডার (Tool Holder) সাধারণত লেথ বা মিলিং মেশিনে কাটিং টুল ধরার জন্য ব্যবহৃত হয়, ড্রিলিং মেশিনে নয়।
15. Simultaneous use of drills is possible in __________ machine.
( can একই সাথে একাধিক ড্রিলিং করা কোন মেশিনে সম্ভব?)
A Gang Drilling Machine features multiple individual motorized spindle heads arranged side-by-side on a single worktable for sequential or mass production operations.
একটি গ্যাং ড্রিলিং মেশিনে (Gang drilling) একটি সাধারণ টেবিলের ওপর পাশাপাশি একাধিক স্বাধীন স্পিন্ডল বা ড্রিল হেড সাজানো থাকে, যা গণ-উত্পাদনে (mass production) একই সাথে কাজ করতে সাহায্য করে।
16. When the dimension is expressed as 20-0.025+0.035 mm then the tolerance is:
(যখন কোনো পরিমাপ 20-0.025+0.035 mm হিসেবে প্রকাশ করা হয়, তখন টলারেন্স কত?)
Tolerance = Upper Limit - Lower Limit
Upper Limit = 20.035 mm | Lower Limit = 19.975 mm
Calculation: 20.035 - 19.975 = 0.06 mm (or simply add both values: 0.035 + 0.025 = 0.06 mm).
টলারেন্স = সর্বোচ্চ সীমা (Upper Limit) - সর্বনিম্ন সীমা (Lower Limit)
সর্বোচ্চ সীমা = 20.035 mm | সর্বনিম্ন সীমা = 19.975 mm
টলারেন্স = 20.035 - 19.975 = 0.06 mm (সহজ কথায় বাইল্যাটারাল লিমিটের ক্ষেত্রে প্লাস এবং মাইনাস মান দুটি সরাসরি যোগ করলেই টলারেন্স পাওয়া যায়: 0.035 + 0.025 = 0.06 mm)।
17. In a hole basis system:
(হোল বেসিস সিস্টেমে নিচের কোনটি করা হয়?)
In the Hole Basis System, the size limits of the Hole are kept strictly constant, and different classes of fits are achieved by changing or adjusting the size of the mating Shaft.
উৎপাদন শিল্পে হোল বেসিস সিস্টেমে (Hole basis system) হোলের বা ছিদ্রের আকারটিকে নির্দিষ্ট বা স্থির (Constant) রাখা হয় এবং কাঙ্ক্ষিত ফিট পাওয়ার জন্য শ্যাফটের (Shaft) আকার পরিবর্তন বা অ্যাডজাস্ট করা হয়।
18. BIS stands for—
(BIS এর পূর্ণরূপ কী?)
BIS (Bureau of Indian Standards) is the national standards body of India. It was formerly known as ISI (Indian Standards Institution), established in 1946.
BIS এর পূর্ণরূপ হলো Bureau of Indian Standards (ভারতীয় মানক ব্যুরো)। এটি ভারতের জাতীয় মান নিয়ন্ত্রণকারী সংস্থা। পূর্বে এটি ISI (Indian Standards Institution) নামে পরিচিত ছিল।
19. Which of the following is not a tool?
(নিচের কোনটি মেকানিকাল কাটিং বা হ্যান্ড টুল নয়?)
Curved, flat, and hand files are metalworking abrasive hand-cutting tools. A Box File is an office stationery item used to store papers.
কার্ভড ফাইল, ফ্ল্যাট ফাইল এবং হ্যান্ড ফাইল হলো মেটাল কাটার ঘর্ষণধর্মী হ্যান্ড টুলস। কিন্তু বক্স ফাইল (Box file) হলো অফিস বা পড়াশোনার কাগজপত্র রাখার সাধারণ ফাইল, এটি কোনো কারিগরি টুল নয়।
20. Name the part marked 'X' in the file.
(ফাইলে 'X' চিহ্নিত অংশটির নাম কী?)
Heel: The smooth, flat portion of the file body located right next to the tang that contains no cutting teeth. The manufacturer's brand name is stamped here.
হীল (Heel): ফাইলের বডির ঠিক গোড়ার দিকের অংশ যেখানে কোনো কাটিং দাঁত (teeth) কাটা থাকে না এবং সাধারণত কোম্পানির নাম খোদাই করা থাকে, তাকে হীল বলে।
21. A file raised slightly from the middle along its length is called:
(মাঝখান থেকে সামান্য উঁচু বা স্ফীত আকৃতির ফাইলকে কী বলা হয়?)
Files are engineered with Convexity (middle part is thicker than the ends) to reduce physical effort and prevent the tool from making a hollow or concave surface on the workpiece.
ফাইলের মাঝখানের অংশ দৈর্ঘ্য বরাবর দুই প্রান্তের তুলনায় সামান্য চওড়া বা উঁচু করা থাকে, একে ফাইলের উত্তলতা বা কনভেক্সিটি (Convexity) বলা হয়। এর ফলে ফাইলিং করার সময় সারফেসকে নিখুঁত সমতল রাখতে সুবিধা হয়।
22. During welding of a lap joint, the angle of the electrode with respect to the work is:
(ল্যাপ জয়েন্ট ওয়েল্ডিং করার সময় কাজের সাপেক্ষে ইলেকট্রোডের কোণ কত ডিগ্রি হওয়া উচিত?)
When performing arc welding on a flat lap joint setup, the welding electrode should ideally be maintained at a lean angle of 60° to 75° relative to the horizontal base plate.
আর্ক ওয়েল্ডিংয়ের মাধ্যমে যখন একটি ল্যাপ জয়েন্ট (একটি পাতের ওপর আরেকটি পাত রাখা) জোড়া দেওয়া হয়, তখন অনুভূমিক তলের সাপেক্ষে ইলেকট্রোডের মূল কোণটি ৬০° থেকে ৭৫° রাখা উচিত।
23. When the current flowing through a given resistance increases, the voltage will:
(নির্দিষ্ট রেজিস্ট্যান্সের মধ্য দিয়ে কারেন্ট প্রবাহ বৃদ্ধি পেলে ভোল্টেজ কী হবে?)
According to Ohm's Law (V = I × R), voltage (V) is directly proportional to current (I) when resistance (R) is constant. Therefore, increasing the current increases the voltage.
ওহমের সূত্র অনুযায়ী (V = I × R), যদি রেজিস্ট্যান্স বা প্রতিরোধ (R) অপরিবর্তিত থাকে, তবে ভোল্টেজ (V) কারেন্ট (I) এর সাথে সরাসরি সমানুপাতিক হয়। অর্থাৎ কারেন্ট বাড়লে ভোল্টেজও বৃদ্ধি পাবে (Increase)।
24. When two wires of different metals are twisted together and heat is applied to the junction, an e.m.f. is produced. This effect is used in a thermocouple to measure:
(দুটি ভিন্ন ধাতুর তারকে একসাথে পেঁচিয়ে জংশনে তাপ দিলে একটি e.m.f উৎপন্ন হয়; থার্মোকপলে এই প্রভাব ব্যবহার করে কী মাপা হয়?)
This principle is called the Seebeck Effect. A thermocouple leverages this temperature-dependent voltage output at the junction to accurately measure extreme temperatures in industries.
এই ঘটনাটিকে সীবেক প্রভাব (Seebeck Effect) বলা হয়। দুটি ভিন্ন ধাতুর সংযোগস্থলে তাপমাত্রার পার্থক্য হলে যে বিদ্যুৎ চালক বল বা e.m.f উৎপন্ন হয়, তা পরিমাপ করে থার্মোকপলের সাহায্যে নিখুঁতভাবে তাপমাত্রা (Temperature) নির্ধারণ করা হয়।
25. Which cast iron cannot be welded?
(কোন ধরণের কাস্ট আয়রনকে ওয়েল্ডিং করা যায় না?)
White Cast Iron is extremely hard and brittle because its carbon is retained entirely in the form of Iron Carbide (Cementite, Fe3C) instead of free graphite. When heated during welding, it immediately cracks, making it practically unweldable.
হোয়াইট কাস্ট আয়রন (White cast iron) অত্যন্ত শক্ত এবং ভঙ্গুর প্রকৃতির হয়, কারণ এর মধ্যকার সমস্ত কার্বন কোনো মুক্ত গ্রাফাইট তৈরি না করে সরাসরি আয়রন কার্বাইড বা সিমেন্টাইট (Fe3C) হিসেবে থাকে। ওয়েল্ডিং করার সময় তাপে এটি দ্রুত ফেটে (cracking) যায়, যার ফলে এটিকে ওয়েল্ড করা অসম্ভব।